Earth Wave Manifesting
aka “The Wish Machine”
Ever heard of Radionics?
The Earth Wave Manifester (EWM) is a radionics device designed to capture your emotion and intent then re-broadcast them indefinitely. Allowing you to experiment with forces known as manifesting.
• Requires 3 AAA batteries
Dream, Intend and Manifest
Looking for a radonics machine?
Is it really possible to amplify your desires and manifest them? Would you like to enhance your meditation?
Manifesting has been talked about for years and practiced by millions of people!
Utilize the latest technology! Knobs/dials have been replaced by a microprocessor making the EWM the next generation in radionics!
Discover what people have been doing for decades!
Light, small and compact, the EWM is portable!
It is intended for both the beginner and the advanced user!
Setting up the Earth Wave Manifeseter
Setting up the Earth Wave Manifester:
- The Earth Wave Manifester requires 3 AAA batteries, not included. Make sure to use high quality, brand name lithium batteries.
- Carefully remove the back cover and install batteries in their proper orientation; note the + and – of the batteries.
- The Power Switch is on the front of the Earth Wave Manifester. To turn ON, slide the switch to the left. To turn OFF, slide to the right.
A quartz crystal is visible through the viewing window of the faceplate. The light in the center of the crystal is the Earth Wave.
The light on the left signals intent.
The light on the right signals target.
How To Operate
Turn on the unit by flipping the switch from the off, to the on position.
You will see three lights flashing behind the crystal. They will flash from left to right for a few seconds, then flash rapidly. Now the unit is ready to read the intent.
Setting Intent:
- While the unit is on, the user should place the intent on the spherical coil on the faceplate of the unit and press the Intent button.
- As the intent is read, the left light will slowly flash.
- When the lights begin to flash rapidly, the intent has been read.
Setting Target:
- After the intent has been read, it can be replaced by the target.
- Place the target on the spherical coil, press the target button.
- As the target is read, the right light will slowly flash.
- When the lights begin to flash rapidly, the target has been read.
Project Intent:
- You may remove the target at this time.
- To project your intent and target you should leave the unit powered on for at least two hours.
- The intent and target remain in the unit’s memory even after the unit has been powered off. Simply turn back on to continue to project your intent and target.
Set New Intent And Target
Intent and target may be reprogrammed by repeating the above.
Setting up the Earth Wave Manifeseter
Setting up the Earth Wave Manifester:
- The Earth Wave Manifester requires 3 AAA batteries, not included. Make sure to use high quality, brand name lithium batteries.
- Carefully remove the back cover and install batteries in their proper orientation; note the + and – of the batteries.
- The Power Switch is on the front of the Earth Wave Manifester. To turn ON, slide the switch to the left. To turn OFF, slide to the right.
A quartz crystal is visible through the viewing window of the faceplate. The light in the center of the crystal is the Earth Wave.
The light on the left signals intent.
The light on the right signals target.
How To Operate
Turn on the unit by flipping the switch from the off, to the on position.
You will see three lights flashing behind the crystal. They will flash from left to right for a few seconds, then flash rapidly. Now the unit is ready to read the intent.
Setting Intent:
- While the unit is on, the user should place the intent on the spherical coil on the faceplate of the unit and press the Intent button.
- As the intent is read, the left light will slowly flash.
- When the lights begin to flash rapidly, the intent has been read.
Setting Target:
- After the intent has been read, it can be replaced by the target.
- Place the target on the spherical coil, press the target button.
- As the target is read, the right light will slowly flash.
- When the lights begin to flash rapidly, the target has been read.
Project Intent:
- You may remove the target at this time.
- To project your intent and target you should leave the unit powered on for at least two hours.
- The intent and target remain in the unit’s memory even after the unit has been powered off. Simply turn back on to continue to project your intent and target.
Set New Intent And Target
Intent and target may be reprogrammed by repeating the above.
What is the difference between INTENT and TARGET?
INTENT
Intent is something you desire: good health, wealth, good wishes, new home, friends, etc.
TARGET
Target is more specific: a person, date, place, etc.
Examples
When using your EWM, your intent may be read by placing a picture or written note of your desire on the unit. The target is read the same way.
Example 1:
You would like to wish good fortune to your friends who are going to Las Vegas.
- Record your intent by placing money or a piece of paper with your desire for your friends on the faceplate of the unit.
- To record the target (your friends), place their picture on the faceplate of the unit.
Example 2:
You would like a new dream home by a certain date.
- Place a picture of your dream home, or a note containing the description, on the faceplate to record the intent (the home).
- To record the target, place a note with the date written on it on the faceplate of the unit.
What Earth Wave Means and How it Works
The EWM is built using surface mount technologies.
Intent is sampled 50 times. That’s 4000 bits of stored intent information.
The scope images below show the 7.8 Hz Earth Wave, as well as the Intent Wave. The Earth Wave Manifester creates square and saw waves from pure DC; no reversing polarity waves (AC) are created.
Operating on 3 AAA batteries, the EWM’s internal microprocessor controls all functions.
The Earth Wave is run constantly at 7.8 Hz to promote harmony with your natural surroundings, via a spiral coil. Your intent/target is broadcast via a paired set of coils.
The spherical coil on the faceplate has a custom designed serpentine receiver built on the unit’s printed circuit board.
The sample is read 11 times. (First a 0 sample is used as a reference, then 10 additional samples to capture the essence of the intent/target, over the period of 1 earth wave, 7.84 Hz.)
The EWM will begin creating earth waves on the scalar coil and the intent/target will be reproduced on the phased coils, aka resonance coils. The unit will re-broadcast the intent/target and the earth wave as long as the unit is left on.
The intent/target is sampled and stored as 50 unique digital values. That’s 4000 bits of information, not 3 to 6 settings. The intent/target remains stored in the EWM until the user chooses to change it.
Download Earth Wave Manifester Documentation
Looking for PDFs? For when you want access without internet.
