Anomaly Meter
The Anomaly Meter is a combination of the SEM Meter and the HLC Thermal Flashlight. It allows the user to see thermal changes and detect energy changes around the device. Like the SEM, the sensitivity can be changed to allow for use in many difficult environments.
Anomaly Meter User Guide
Setting up the Anomaly Meter:
- The Anomaly Meter requires 3 AAA batteries, not included. Make sure to use high quality, brand name lithium batteries.
- Carefully remove the back cover and install batteries in their proper orientation; note the + and – of the batteries.
- The Power Switch is on the front of the Anomaly Meter. To turn ON, slide the switch to the left. To turn OFF, slide to the right.
Changing Modes
To change modes on the Anomaly Meter, simply press the MODE button on the faceplate of the device.
When the Anomaly Meter modes have been changed, the corresponding LED will light up.
To turn on the thermal flashlight:
- Press both the right and left arrow buttons at the same time while the Anomaly Meter is turned on.
Changing Modes
To change modes on the Anomaly Meter, simply press the MODE button on the faceplate of the device.
When the Anomaly Meter modes have been changed, the corresponding LED will light up.
Modes
Mode 1 - Energy Level Mode
Mode 1 will show you the energy around the meter and display it on a 5 LED display. The sensitivity can be changed using the up / down buttons to filter background energy. Instead of “averaging,” energy is sampled rapidly, allowing the display to show different energy levels.
Pressing the left button increases the sensitivity; pressing the right button decreases the sensitivity.
Mode 1 will illuminate the first green light from the left.
Mode 2 - Energy Level Mode with Audio Tones
Mode 2 will show you the energy around the meter and display it on a 5 LED display. The sensitivity can be changed using the up / down buttons to filter background energy. Instead of “averaging,” energy is sampled rapidly, allowing the display to show different energy levels.
Pressing the left button increases the sensitivity; pressing the right button decreases the sensitivity.
Includes Audio Tones which will alert you to these changes.
Mode 2 will illuminate the second green light from the left.
Mode 3 - Averaged Energy Level Mode
Mode 3 will show you the energy around the meter and display it on a 5 LED display, using the center LED to act as the average. By doing this, you can now see changes of both increases and decreases of energy.
Mode 3 will illuminate the yellow light.
Mode 4 - Averaged Energy Level Mode with Audio Tones
Mode 4 will show you the energy around the meter and display it on a 5 LED display, using the center LED to act as the average. By doing this, you can now see changes of both increases and decreases of energy.
Includes Audio Tones which will alert you to these changes.
Thermal Flashlight Operation
To operate the Thermal Flashlight:
Press both the right and left arrow buttons at the same time while the Anomaly Meter is turned on.
Blue: Cold Temperatures, typically below 35.*
Blue/Green: Cool Temperatures, between 36-50.*
Green: Normal Temperatures, between 50-70.*
Green/Red: Warm Temperatures, between 70-80.*
Red: Hot Temperatures, typically 80 and above.*
*Fahrenheit Temperatures.
